基于循环频域滤波及Schmidt正交对消的单通道信号分离算法

单通道盲信号分离是信号处理领域中的研究热点和难点.分析了循环频域滤波用于单通道时频重叠信号分离的可行性,提出了基于循环平稳频移滤波器及Schmidt正交对消的信号分离方法.利用频移滤波器提取一个源信号,通过Schmidt正交化法从观测信号中消去已提取的源信号获得另一个源信号.仿真表明,本文算法可有效分离时频重叠的雷达通信信号,相比时域维纳滤波,分离性能提高了10dB以上.     

雷达干扰资源一对多分配方法

在对雷达干扰资源分配的一般优化模型和求解算法进行分析的基础上,从提高资源利用效率的角度出发,提出了目标雷达分群思想,并建立了一种新的基于一对多策略的雷达干扰资源分配模型,通过对目标雷达群的一对一分配实现对单部雷达的一对多分配.最后,对该模型中一些关键性问题进行了探讨,如任务整合、新任务参数确定、任务优先级排序、干扰机位置部署以及单目标雷达群干扰效益评估等.     

基于干涉仪测向的电子侦察卫星单星定位精度分析

针对信息化战场面临的复杂电磁环境,研究基于二维干涉仪测向方法的电子侦察卫星单星定位体制。分析了电子侦察卫星单星定位原理及定位算法,提出了电子侦察卫星单星测向定位精度GDOP算法,通过仿真定量计算卫星测角误差、卫星姿态误差和卫星位置误差对卫星定位精度的影响程度。结果表明电子侦察卫星测角精度、姿态控制精度和位置测量精度越高,单星定位精度越高。     

一种基于分形结构的宽带圆极化缝隙天线的仿真与设计

文中基于空间填充曲线提出了一种利用微带馈电产生宽带圆极化特性的缝隙天线,通过对这种缝隙天线分形进行分析仿真可以得出,该天线不仅可以减小天线尺寸而且具有良好的宽带圆极化特性,驻波比小于2的阻抗带宽达到81%(2.22 GHz~5.25 GHz),轴比小于0.2 dB的轴比带宽达到了80%(2.22 GHz~5.18 GHz)。最后文中通过增加背腔结构使天线实现单向辐射并提高了辐射增益。     

稳像式火控系统实车训练装置的研制

该训练装置可以在安装稳像式火控系统的坦克上完成射击基础练习的训练与考核.它以单片机为核心,在射击操作与实车相同的条件下,具有自动检靶,自动记录发射数、命中数,自动变换目标,自动报警,自动评定和显示成绩等功能.射手可独自在坦克内操作,自行开始练习,自我检查操作结果.     

N元光纤光栅传感器阵列解调信号的最低可见度分析

研究了非平衡光纤Mach-Zehnder干涉仪解调N元光纤光栅传感器阵列时的偏振衰落问题.运用邦加球和光纤偏振光传输理论,利用简化模型,通过详细的理论分析,得到优化控制下阵列传感信号最低可见度的下限表达式,并通过计算机仿真,验证了结果的正确性,并详细分析了仿真实验的结果.     

基于PIC系列单片机的迫弹电子时间引信控制系统设计

介绍了迫弹电子时间引信控制系统的电路组成、工作原理及其功能,并以PIC16F873A型单片机作为控制器核心,对引信的工作过程进行控制,提高了引信的安全性和可靠性。     

Demand forecasting by temporal aggregation

Demand forecasting performance is subject to the uncertainty underlying the time series an organization is dealing with. There are many approaches that may be used to reduce uncertainty and thus to improve forecasting performance. One intuitively appealing such approach is to aggregate demand in lower‐frequency “time buckets.” The approach under concern is termed to as temporal aggregation, and in this article, we investigate its impact on forecasting performance. We assume that the nonaggregated demand follows either a moving average process of order one or a first‐order autoregressive process and a single exponential smoothing (SES) procedure is used to forecast demand. These demand processes are often encountered in practice and SES is one of the standard estimators used in industry. Theoretical mean‐squared error expressions are derived for the aggregated and nonaggregated demand to contrast the relevant forecasting performances. The theoretical analysis is supported by an extensive numerical investigation and experimentation with an empirical dataset. The results indicate that performance improvements achieved through the aggregation approach are a function of the aggregation level, the smoothing constant, and the process parameters. Valuable insights are offered to practitioners and the article closes with an agenda for further research in this area. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 60: 479–498, 2013     

装备器材库温湿度监控系统的设计与实现

军用装备器材仓库温湿度监控是目前亟待解决的问题.文中详细地阐述了种切实可行的设计方法--主从式两级数字化监控系统的设计原理与实现方法,并用Borland C++Builder语言对其组态软件进行程序设计.     

A branch and bound algorithm for the minimum storage‐time sequencing problem

The minimum storage‐time sequencing problem generalizes many well‐known problems in combinatorial optimization, such as the directed linear arrangement and the problem of minimizing the weighted sum of completion times, subject to precedence constraints on a single processor. In this paper we propose a new lower bound, based on a Lagrangian relaxation, which can be computed very efficiently. To improve upon this lower bound, we employ a bundle optimization algorithm. We also show that the best bound obtainable by this approach equals the one obtainable from the linear relaxation computed on a formulation whose first Chvàtal closure equals the convex hull of all the integer solutions of the problem. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 313–331, 2001